Home
/
ZyXEL Communications
/
XGS-4528F
/
User Manual

ZyXEL Communications XGS-4528F, User Manual, Page: 129 / 491

Share

Page: 129 / 491

ZyXEL Communications XGS-4528F User Manual Download Page 129

Chapter 9 VLAN

XGS-4526/4528F/4728F User’s Guide

129

For example, ports 1, 2, 3 and 4 belong to static VLAN 100, and ports 4, 5, 6, 7
belong to static VLAN 120. You can configure a protocol based VLAN A with priority
3 for ARP traffic received on port 1, 2 and 3. You can also have a protocol based
VLAN B with priority 2 for Apple Talk traffic received on port 6 and 7. All upstream
ARP traffic from port 1, 2 and 3 will be grouped together, and all upstream Apple
Talk traffic from port 6 and 7 will be in another group and have higher priority than
ARP traffic when they go through the uplink port to a backbone switch C.

Figure 45

Protocol Based VLAN Application Example

9.9 Configuring Protocol Based VLAN

Click Protocol Based VLAN in the VLAN Port Setting screen to display the
configuration screen as shown.

Figure 46

Advanced Application > VLAN > VLAN Port Setting > Protocol Based

VLAN

«
...
127
128
129
130
131
...
»

Summary of Contents for XGS-4528F












































































































































































































































































































































































































































































































Reviews:

No comments