manualshive.com logo in svg

ZyXEL Communications XGS-4528F, User Manual, Page: 202 / 491

Share
Download
ZyXEL Communications XGS-4528F User Manual Download Page 202

Chapter 20 Classifier

XGS-4526/4528F/4728F User’s Guide

202

Click Advanced Application > Classifier in the navigation panel to display the 
configuration screen as shown.

Figure 87   

Advanced Application > Classifier 

The following table describes the labels in this screen. 

Table 49   

Advanced Application > Classifier 

LABEL

DESCRIPTION

Active

Select this option to enable this rule. 

Name 

Enter a descriptive name for this rule for identifying purposes. 

Packet 
Format

Specify the format of the packet. Choices are All, 802.3 tagged, 802.3 
untagged, Ethernet II tagged and Ethernet II untagged.

A value of 802.3 indicates that the packets are formatted according to the 
IEEE 802.3 standards.

A value of Ethernet II indicates that the packets are formatted according to 
RFC 894, Ethernet II encapsulation.

Summary of Contents for XGS-4528F












































































































































































































































































































































































































































































































Reviews:

No comments