ZyXEL Communications VMG4325-B10A User Manual Download Page 21

Page: 21 / 367

Chapter 1 Introducing the Device

VMG4380-B10A / VMG4325-B10A User’s Guide

1.5 LEDs (Lights)

The following graphic displays the labels of the LEDs.

Figure 5

LEDs on the Device

None of the LEDs are on if the Device is not receiving power.

Table 1

LED Descriptions

LED

COLOR

STATUS

DESCRIPTION

POWER

Green

The Device is receiving power and ready for use.

Blinking

The Device is self-testing.

Red

The Device detected an error while self-testing, or there is a
device malfunction.

Off

The Device is not receiving power.

Blinking

Firmware upgrade is in progress.

ETHERNET
LAN 1-4

Green

The Device has a successful Ethernet connection with a device
on the Local Area Network (LAN).

Blinking

The Device is sending or receiving data to/from the LAN.

Off

The Device does not have an Ethernet connection with the LAN.

Summary of Contents for VMG4325-B10A
















































































































































































































































































































































































Search results

Summary of Contents for VMG4325-B10A

Reviews:

Brands by name

Popular brands

ZyXEL Communications VMG4325-B10A, User Manual

Search results

Summary of Contents for VMG4325-B10A

Reviews:

Brands by name

Popular brands