ZyXEL Communications Prestige 791R, User Manual

Page: 48 / 238

Prestige 791R G.SHDSL Router
4.2.3 Transfer Rates
The Prestige supports the following symmetrical multi-rate data transmission speeds:
72, 136, 200, 264, 392, 520, 776, 1032, 1160, 1544, 1736, 2056 and 2312Kbps.
You can increase the capacity of the Internet connection (within certain limitations) without changing your
ISP or buying new equipment.
For back-to-back applications make sure that your Prestige and its peer have the same Transfer Max Rate
and the same Transfer Min Rate . Two (maximum and minimum) transfer rates are used to accommodate
fluctuations in line speed. This is known as Dynamic Bandwidth Allocation.
4.2.4 Standard Mode
If your Prestige is a server, then select the mode that applies to your region: ANSI (American National
Standards Institute) and ETSI (European Telecommunications Standards Institute). If your Prestige is a
client, select the same
Standard Mode that the server side selects. ANSI and ETSI create recommendations
and standards for the telecommunications industry.
4.3 WAN Setup Screen
From the main menu, enter 2 to open menu 2.
Menu 2 - WAN Setup
Service Type= Client
Rate Adaption= Enable
Transfer Max Rate(Kbps)= 2312
Transfer Min Rate(Kbps)= 2312
Standard Mode= ANSI(ANNEX_A)
Dial-Backup:
Active= No
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel:
Figure 4-2 WAN Setup
WAN 4-3