ZyXEL Communications Prestige 791R, User Manual

Page: 89 / 238

Prestige 791R G.SHDSL Router
8-6 Remote Node TCP/IP Configuration
Step 2.
Move the cursor to the Edit IP/Bridge field, press [
SPACE BAR
] to select
Yes,
then press
[ENTER] to display Menu 11.3 – Remote Node Network Layer Options.
Figure 8-3 Remote Node Network Layer Options
Table 8-2 Remote Node Network Layer Options
FIELD DESCRIPTION EXAMPLE
IP Options
IP Address
Assignment
Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
node is using a dynamically assigned IP address or Static if it is using a
static (fixed) IP address. You will only be able to configure this in the ISP
node (also the one you configure in
Menu 4 ). All other nodes are set to
Static .
Dynamic
Rem IP Addr This is the IP address you entered in the previous menu.
Rem Subnet
Mask
Type the subnet mask assigned to the remote node.
My WAN
Addr
Some implementations, especially UNIX derivatives, require separate IP
network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the IP
address assigned to the WAN port of your Prestige.
This address refers to the local Prestige address, not the remote router
address.
Menu 11.3 - Remote Node Network Layer Options
IP Options: Bridge Options:
IP Address Assignment= Dynamic Ethernet Addr Timeout (min)= N/A
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set= 2
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies= 3,4,5,6
Press ENTER to Confirm or ESC to Cancel: