Prestige 660W/HW Series Compact Guide
19
5.3 Internet Access Using the Wizard
Use the Wizard Setup screens to configure your system for Internet access settings and
fill in the fields with the information in the
Internet Account Information
table. Your ISP
may have already configured some of the fields in the wizard screens for you.
Step 1.
In the
Site Map
screen click
Wizard Setup
to display the first wizard
screen.
Figure 7 Wizard Screen 1
From the
Mode
drop-down list box, select
Routing
(default) if your ISP allows
multiple computers to share an Internet
account. Otherwise select
Bridge
.
Select the encapsulation type your ISP
uses from the
Encapsulation
drop-down
list box. Choices vary depending on what
you select in the
Mode
field.
Select the multiplexing method used by
your ISP from the
Multiplex
drop-down
list box.
Enter the correct Virtual Path Identifier
(VPI) and Virtual Channel Identifier (VCI)
numbers supplied by your ISP in the
VPI
and
VCI
fields. These fields may already
be configured.
Click
Next
.
Step 2.
The second wizard screen varies depending on what mode and
encapsulation type you use. All screens shown are with routing mode.
Configure the fields and click
Next
to continue.
