Prestige 660W/HW Series Compact Guide
38
Figure 23 Adding/Editing Source and Destination Addresses
The following table describes the labels in this screen.
Table 9 Adding/Editing Source and Destination Addresses
LABEL
DESCRIPTION
Address Type
Do you want your rule to apply to packets with a particular (single)
IP address, a range of IP addresses (e.g., 192.168.1.10 to
192.169.1.50), a subnet or any IP address? Select an option from
the drop down list box
Start IP
Address
Enter the single IP address or the starting IP address in a range
here.
End IP
Address
Enter the ending IP address in a range here.
Subnet Mask
Enter the subnet mask here, if applicable.
