ZyXEL Communications Prestige 2602RL-D3A, Support Notes

Page: 165 / 176

Prestige 2602RL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
165
0010: 01 8D F2 0C 40 00 7F 06-D5 9C CA 84 9B 61 CC D9 ....@........a..
0020: 00 02 28 26 00 50 00 C8-C0 15 4D 71 3E 47 50 18 ..(&.P....Mq>GP.
0030: 1E 87 43 74 00 00 47 45-54 20 2F 70 69 63 74 75 ..Ct..GET /pictu
0040: 72 65 73 2F 6D 61 67 61-7A 69 6E 65 5F 6C 6F 67 res/magazine_log
0050: 6F 2F 62 65 73 74 6F 66-74 69 6D 65 73 2E 67 69 o/bestoftimes.gi
Prestige>
Debug PPPoE Connection
Debug PPPoE Connection
The Prestige supports traces when there is problem to connect your ISP using PPPoE protocol. Please
follow the procedure below to collect the trace for our troubleshooting.
1. Remove the LAN cable attached on the Prestige
2. Enter SMT using console port
3. Enter Menu 24.8-CI command mode
4. Type the following commands:

sys trcp sw on (turn on packet trace)

sys errctl 3 (save crash information and make system enter debug mode after the crash)

poe debug 1 (turn on pppoe debug)

dev dial 1 (dial remote node 1)
5. After all, if the Prestige crashes and you can do nothing, please send the above log back to us.
6. If the Prestige crashes and you are able to enter commands, please type 'atds' in debug mode to
dump the log and send the log to us.
7. If the Prestige does not crash but just can not dial out, please capture the following further log and
send us the log.

sys trcp sw off (turn off packet trace)

sys log disp i (capture system error log)

sys trcp parse (parse the trace in detail)