Prestige 2602RL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
97
Enter the SIP register server’s address in this field.
If you were not given a register server address, then enter the address
from the
SIP Server Address
field again here.
REGISTER
Server Port
Enter the SIP register server’s listening port for SIP in this field.
If you were not given a register server port, then enter the port from the
SIP Server Port
field again here.
SIP Service
Domain
A SIP service domain is the domain name that comes after the @ symbol in a
full SIP URI.
Enter the SIP service domain name in this field.You can use up to 127 ASCII
Extended set characters.
User Name
This is the user name for registering this SIP account with the SIP register
server. Type the user name exactly as it was given to you. Use ASCII
characters.
Password
Type the password associated with the user name above. Use ASCII
Extended set characters.
Send Caller
ID
Select this check box to show identification information when you make VoIP
calls. Clear this check box to not show identification information when you
make VoIP calls.
Advanced
Setup
Click Advanced Setup to open a screen where you can configure the
Prestige’s advanced VoIP settings like SIP server settings, the RTP port
range and the coding type.
Apply
Click
Apply
to save your changes back to the Prestige.
Reset
Click
Reset
to begin configuring this screen afresh.
Phone port settings
Prestige allows you to configure the volume and echo cancellation setting for each individual phone port.
