Prestige 2602RL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
92
This can be applied on the emergency situation such as for contacting police, fire or emergency medical
services when is powerless situation. On the following section, it tells you how to configure lifeline under
P2602RL – D3A WEB GUI.
Lifeline configuration
To configure lifeline in P2602RL – D3A, click on VoIP -> PSTN Line to display the following screen.
You can specify a prefix number in prefix field. This number will be used to switch from VoIP to PSTN
system when you wish to make a call to PSTN destination. For example, when you want to dial out to a PSTN
destination, you first pick up the phone, and you will heard a dial tone, than you push in the prefix number as
defined in prefix field in this case it will be 0000, than the device will switch over to PSTN line. At this
moment you will hear dial tone from PSTN again. At this state you can dial out to PSTN as you would on a
regular PSTN system.
Relay to PSTN
The Relay to PSTN field can be found under PSTN configuration WEB GUI in Relay to PSTN section. This
field is used to specify phone numbers to which the Prestige will always send calls through the regular PSTN
phone service without pushing prefix. In other words, numbers which specify on this field do not need to dial
prefix number to be dialed out. However, these numbers must be for phones on the PSTN (not VOIP phones)
and currently, P2602RL –D3A support up to nine entries under this field.
