ZyXEL Communications P-661H-61, Manual, Page: 206 / 404

Chapter 14 MAC Filter
P-661HNU-Fx User’s Guide
206
14.2 The MAC Filter Screen
Use the MAC Filter screen to allow wireless clients access to the ZyXEL Device. To
change your ZyXEL Device’s MAC filter settings, click Security > MAC Filter. The
screen appears as shown.
Figure 85 Security > MAC Filter
The following table describes the labels in this menu.
Table 50 Security > MAC Filter
LABEL DESCRIPTION
MAC
Address
Filter Select Enable to activate MAC address filtering.
Set This is the index number of the MAC address.
Allow Select Allow to permit access to the ZyXEL Device. MAC addresses not
listed will be denied access to the ZyXEL Device.
If you clear this, the MAC Address field for this set clears.
MAC
Address Enter the MAC addresses of the wireless station that are allowed access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a
valid MAC address format, that is, six hexadecimal character pairs, for
example, 12:34:56:78:9a:bc.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.