ZyXEL Communications P-661H-61, Manual

Page: 186 / 404

Chapter 10 Quality of Service (QoS)
P-661HNU-Fx User’s Guide
186
10.5 The QoS Monitor Screen
To view the ZyXEL Device’s QoS packet statistics, click Network Setting > QoS
> Monitor. The screen appears as shown.
Figure 75 Network Setting > QoS > Monitor
DHCP This field is available only when you select IP in the Ether Type field,
and UDP in the IP Protocol field.
Select this option and select a DHCP option.
If you select Vendor Class ID (DHCP Option 60), enter the Class
ID of the matched traffic, such as the type of the hardware or
firmware.
If you select ClientID (DHCP Option 61), enter the Type of the
matched traffic and Client ID of the DHCP client.
If you select User Class ID (DHCP Option 77), enter the User
Class Data, which is a string that identifies the user’s category or
application type in the matched DHCP packets.
If you select VendorSpecificIntro (DHCP Option 125), enter the
Enterprise Number of the software of the matched traffic and
Vendor Class Data used by all the DHCP clients.
Service Select the service classification of the traffic.
Exclude Select this option to exclude the packets that match the specified
criteria from this classifier.
Apply Click Apply to save your changes.
Back Click Back to return to the previous screen without saving.
Table 41 Class Setup: Add/Edit (continued)
LABEL DESCRIPTION