ZyXEL Communications P-3202HN-Ba, User Manual

Page: 187 / 250

Chapter 16 Remote Management
IAD User’s Guide
187
The following table describes the labels in this screen.
16.4 The FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the IAD’s
firmware and configuration files, please see the User’s Guide chapter on firmware
and configuration file maintenance for details. To use this feature, your computer
must have an FTP client.
To change your IAD’s FTP settings, click Advanced > Remote MGMT > FTP. The
screen appears as shown. Use this screen to specify which interfaces allow FTP
access and from which IP address the access can come.
Figure 88 Remote Management > FTP
Table 59 Remote Management > Telnet
LABEL DESCRIPTION
Port You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Access Status Select the interface(s) through which a computer may access the IAD
using this service.
Secured Client
IP A secured client is a “trusted” computer that is allowed to communicate
with the IAD using this service.
Select All to allow any computer to access the IAD using this service.
Choose Selected to just allow the computer with the IP address that you
specify to access the IAD using this service.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to begin configuring this screen afresh.