manualshive.com logo in svg

ZyXEL Communications P-3202HN-Ba, User Manual

Share
Download
ZyXEL Communications P-3202HN-Ba User Manual Download Page 118

Chapter 10 Voice

IAD User’s Guide

118

address identifies an e-mail account. The format of a SIP identity is SIP-
Number@SIP-Service-Domain.

SIP Number

The SIP number is the part of the SIP URI that comes before the “@” symbol. A 
SIP number can use letters like in an e-mail address ([email protected] for 
example) or numbers like a telephone number ([email protected] 
for example).

SIP Service Domain

The SIP service domain of the VoIP service provider is the domain name in a SIP 
URI. For example, if the SIP address is 

[email protected]

, then 

“VoIP-provider.com” is the SIP service domain.

10.2  SIP Service Provider

Use this screen to maintain basic information about each SIP account. Your VoIP 
service provider (the company that lets you make phone calls over the Internet) 
should provide this. You can also enable and disable each SIP account. To access 
this screen, click VoIP > SIP.

Figure 52   

VoIP > SIP > SIP Service Provider

Summary of Contents for P-3202HN-Ba



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands