ZyXEL Communications P-3202HN-Ba, User Manual

Page: 160 / 250

Chapter 13 Static Route
IAD User’s Guide
160
13.2 The Static Route Screen
Click Advanced > Static Route to open the Static Route screen.
Figure 75 Static Route
The following table describes the labels in this screen.
Table 49 Static Route
LABEL DESCRIPTION
# This is the number of an individual static route.
Active This field indicates whether the rule is active or not.
Clear the check box to disable the rule. Select the check box to enable it.
Name This is the name that describes or identifies this route.
Destination This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
Netmask This parameter specifies the IP network subnet mask of the final
destination.
Gateway This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
Modify Click the Edit icon to go to the screen where you can set up a static route
on the IAD.
Click the Remove icon to remove a static route from the IAD. A window
displays asking you to confirm that you want to delete the route.
Apply Click this to apply your changes to the IAD.
Cancel Click this to return to the previously saved configuration.