ZyXEL Communications P-2601HN(L)-F1 Series, User Manual

Page: 69 / 344

Chapter 5 Broadband
P-2601HN(L)-F1 Series User’s Guide
69
5.2 The Broadband Screen
Use this screen to change your ZyXEL Device’s Internet access settings. Click
Network Setting> Broadband from the menu. The summary table shows you
the configured WAN services (connections) on the ZyXEL Device.
Figure 13 Network Setting > Broadband
The following table describes the labels in this screen.
Table 5 Network Setting > Broadband
LABEL DESCRIPTION
Add new WAN
interface Click this button to create a new connection.
# This is the index number of the entry.
Status This is the status of the connection.
Name This is the service name of the connection.
Type This shows the type of interface used by this connection.
Mode This shows whether the connection is in routing mode or bridge mode.
Encapsulation This is the method of encapsulation used by this connection.
VPI/VCI This is the Virtual Path Identifier (VPI).
VCI This is the Virtual Channel Identifier (VCI).
Vlan8021p This indicates the 802.1P priority level assigned to traffic sent through
this connection. This displays N/A when there is no priority level
assigned.
VlanMuxId This indicates the VLAN ID number assigned to traffic sent through
this connection. This displays N/A when there is no VLAN ID number
assigned.
ATM QoS This is the type of ATM QoS of the connection.
IGMP Proxy This shows whether the ZyXEL Device act as an IGMP proxy on this
connection.
NAT This shows whether NAT is activated or not for this connection.
Default Gateway This shows whether the ZyXEL Device use the WAN interface of this
connection as the system default gateway.
Modify Click the Edit icon to configure the connection.
Click the Delete icon to remove the connection.