ENGLISH
4
The LEDs
Look at the LEDs (lights). When you connect the power, the power
( ) LED blinks and stays
on once the device is ready. The LAN
(
) and WLAN (
) LEDs turn on if the
corresponding connections are properly made.
V
If the power ( ), LAN ( ) or WLAN (
) LEDs do not turn on, check your
connections. If this doesn’t help, disconnect the NWA570N from its power
source, wait for a few seconds and turn it back on.
2 Set up Your Wireless Network with WPS
You can use Wi-Fi Protected Setup (WPS) to add wireless devices to your wireless
network. The other wireless devices must also support WPS.
"
Go to Section
if you do not want to use WPS to set up your network.
1
Place a WPS-enabled device within range of the NWA570N.
2
Press the WPS button on both devices. It doesn’t matter which button is pressed first.
You must press the second button within two minutes of pressing the first one.
"
Your NWA570N has a
WPS
button located on its casing, as well as a
WPS
button available in the web configurator used to manage the NWA570N. Other
WPS-enabled devices should have at least one similar WPS button.
Summary of Contents for NWA570N
