manualshive.com logo in svg

ZyXEL Communications NWA-3160, User Manual

Share
Download
ZyXEL Communications NWA-3160 User Manual Download Page 78

Chapter 5 Dashboard

NWA3000-N Series User’s Guide

78

WDS Link Status

This section displays information about the WDS settings when the 
NWA3000-N series AP is in controller mode and configured to use 
WDS.

Radio

This field displays which radio the NWA3000-N series AP is configured 
to use for WDS.

Link ID

This field displays the name of the bridge connection.

Peer MAC 

Address

This field displays the hardware address of the peer device.

Security

This field displays which type of security the NWA3000-N series AP is 
using for WDS with this radio.

Status

This field displays the status of the connection to the peer device.

System Status

System 

Uptime

This field displays how long the NWA3000-N series AP has been 
running since it last restarted or was turned on.

Current Date/

Time

This field displays the current date and time in the NWA3000-N series 
AP. The format is yyyy-mm-dd hh:mm:ss.

Current Login 

User

This field displays the user name used to log in to the current session, 
the amount of reauthentication time remaining, and the amount of 
lease time remaining.

Boot Status

This field displays details about the NWA3000-N series AP’s startup 
state.

OK

 -  The NWA3000-N series AP started up successfully.

Firmware update OK 

- A firmware update was successful.

Problematic configuration after firmware update

 - The 

application of the configuration failed after a firmware upgrade.

System default configuration

 - The NWA3000-N series AP 

successfully applied the system default configuration. This occurs 
when the NWA3000-N series AP starts for the first time or you 
intentionally reset the NWA3000-N series AP to the system default 
settings.

Fallback to lastgood configuration

 - The NWA3000-N series AP 

was unable to apply the startup-config.conf configuration file and fell 
back to the lastgood.conf configuration file.

Fallback to system default configuration

 - The NWA3000-N 

series AP was unable to apply the lastgood.conf configuration file and 
fell back to the system default configuration file (system-
default.conf).

Booting in progress

 - The NWA3000-N series AP is still applying the 

system configuration.

Management 

Mode

This shows whether the NWA3000-N series AP is set to control other 
NWA3000-N series APs, work as a stand alone AP, or be controlled by 
another NWA3000-N series AP.

Interface Status 
Summary

If an Ethernet interface does not have any physical ports associated 
with it, its entry is displayed in light gray text. Click the

 Detail

 icon to 

go to a (more detailed) summary screen of interface statistics.

Table 17   

Dashboard (continued)

LABEL

DESCRIPTION

Summary of Contents for NWA-3160



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands