ZyXEL Communications NWA-3160, User Manual

Page: 243 / 386

Chapter 17 File Manager
NWA3000-N Series User’s Guide
243
In the following example lines 1 and 2 are comments. Line 5 exits sub command
mode.
! this is from Joe
# on 2010/12/05
wlan-ssid-profile default
ssid Joe-AP
qos wmm
security default
!
Errors in Configuration Files or Shell Scripts
When you apply a configuration file or run a shell script, the NWA3000-N series AP
processes the file line-by-line. The NWA3000-N series AP checks the first line and
applies the line if no errors are detected. Then it continues with the next line. If
the NWA3000-N series AP finds an error, it stops applying the configuration file or
shell script and generates a log.
You can change the way a configuration file or shell script is applied. Include
setenv stop-on-error off
in the configuration file or shell script. The
NWA3000-N series AP ignores any errors in the configuration file or shell script
and applies all of the valid commands. The NWA3000-N series AP still generates a
log for any errors.
17.2 Configuration File
Click Maintenance > File Manager > Configuration File to open this screen.
Use the Configuration File screen to store, run, and name configuration files.
You can also download configuration files from the NWA3000-N series AP to your
computer and upload configuration files from your computer to the NWA3000-N
series AP.
Once your NWA3000-N series AP is configured and functioning properly, it is highly
recommended that you back up your configuration file before making further
configuration changes. The backup configuration file will be useful in case you
need to return to your previous settings.
Configuration File Flow at Restart
• If there is not a startup-config.conf when you restart the NWA3000-N series
AP (whether through a management interface or by physically turning the
power off and back on), the NWA3000-N series AP uses the system-
default.conf configuration file with the NWA3000-N series AP’s default settings.