ZyXEL Communications NWA-3160, User Manual

Page: 202 / 386

Chapter 15 System
NWA3000-N Series User’s Guide
202
Figure 90 Configuration > System > WWW > Service Control
The following table describes the labels in this screen.
Table 73 Configuration > System > WWW > Service Control
LABEL DESCRIPTION
HTTPS
Enable
Select the check box to allow or disallow the computer with the IP
address that matches the IP address(es) in the
Service Control
table to access the NWA3000-N series AP Web Configurator using
secure HTTPs connections.
Server Port The HTTPS server listens on port 443 by default. If you change the
HTTPS server port to a different number on the NWA3000-N series
AP, for example 8443, then you must notify people who need to
access the NWA3000-N series AP Web Configurator to use “https://
NWA3000-N series AP IP Address:
8443 ” as the URL.
Authenticate Client
Certificates Select Authenticate Client Certificates (optional) to require the
SSL client to authenticate itself to the NWA3000-N series AP by
sending the NWA3000-N series AP a certificate. To do that the SSL
client must have a CA-signed certificate from a CA that has been
imported as a trusted CA on the NWA3000-N series AP.
Server Certificate Select a certificate the HTTPS server (the NWA3000-N series AP)
uses to authenticate itself to the HTTPS client. You must have
certificates already configured in the
My Certificates screen.
Redirect HTTP to
HTTPS To allow only secure Web Configurator access, select this to redirect
all HTTP connection requests to the HTTPS server.
HTTP
Enable
Select the check box to allow or disallow the computer with the IP
address that matches the IP address(es) in the
Service Control
table to access the NWA3000-N series AP Web Configurator using
HTTP connections.