manualshive.com logo in svg

ZyXEL Communications NWA-3160, User Manual

Share
Download
ZyXEL Communications NWA-3160 User Manual Download Page 355

 Appendix D Open Software Announcements

NWA3000-N Series User’s Guide

355

distribute software through any other system and a licensee cannot impose that choice. This section is 
intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by 
copyrighted interfaces, the original copyright holder who places the Program under this License may 
add an explicit geographical distribution limitation excluding those countries, so that distribution is 
permitted only in or among countries not thus excluded. In such case, this License incorporates the 
limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public 
License from time to time. Such new versions will be similar in spirit to the present version, but may 
differ in detail to address new problems or concerns. Each version is given a distinguishing version 
number. If the Program specifies a version number of this License which applies to it and "any later 
version", you have the option of following the terms and conditions either of that version or of any later 
version published by the Free Software Foundation. If the Program does not specify a version number 
of this License, you may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution 
conditions are different, write to the author to ask for permission. For software which is copyrighted by 
the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions 
for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of 
our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE 
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN 
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" 
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED 
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD 
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR 
OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY 
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE 
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, 
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO 
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED 
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO 
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

END OF TERMS AND CONDITIONS

All other trademarks or trade names mentioned herein, if any, are the property of their respective 
owners.

This Product includes ppp, tcpdump, unzip, zip, libnet, openssh, hostapd and ftp-tls software under 
BSD license

BSD

Summary of Contents for NWA-3160



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands