Chapter 8 Routing
LTE7461-M602 User’s Guide
90
8.3 The DNS Route Screen
Configure how domain name - IP address mapping queries are forwarded from the Zyxel Device to a
DNS (Domain Name System) server if your Zyxel Device has multiple WAN interfaces. Click
Network
Setting > Routing > DNS Route
to open the
DNS Route
screen.
Figure 66
Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
8.3.1 Add/Edit DNS Route
Click
Add New DNS Route
in the
DNS Route
screen, use this screen to configure the required information
for a DNS route.
OK
Click this to save your changes.
Click this to exit this screen without saving.
Cancel
Table 27 Routing: Add/Edit (continued)
LABEL
DESCRIPTION
Table 28 Network Setting > Routing > DNS Route
LABEL
DESCRIPTION
Add New DNS
Route
Click this to create a new entry.
#
This is the number of an individual DNS route.
Status
This field indicates whether the rule is active (yellow bulb) or not (gray bulb).
Domain Name
This is the domain name to which the DNS route applies.
WAN Interface
This is the WAN interface through which the matched DNS request is routed.
Subnet Mask
This parameter specifies the IP network subnet mask.
Modify
Click the
Edit
icon to configure a DNS route on the Zyxel Device.
Click the
Delete
icon to remove a DNS route from the Zyxel Device.
Summary of Contents for LTE7461-M602
Page 12: ...12 PART I User s Guide...
Page 26: ...25 PART II Technical Reference...