manualshive.com logo in svg

ZyXEL Communications LTE7461-M602, User Manual

Share
Download
ZyXEL Communications LTE7461-M602 User Manual Download Page 71

Chapter 7 Home Networking

LTE7461-M602 User’s Guide

70

7.3  The Static DHCP Screen

When any of the LAN clients in your network want an assigned fixed IP address, add a static lease for 
each LAN client. Knowing the LAN client’s MAC addresses is necessary. Assign IP addresses on the LAN 
to specific individual computers based on their MAC addresses.

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned 
at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.

7.3.1  Before You Begin

Find out the MAC addresses of your network devices if you intend to add them to the 

Static DHCP

 

screen.

Use this screen to change your Zyxel Device’s static DHCP settings. Click 

Network Setting > Home 

Networking

 

> Static DHCP

 to open the following screen.

Figure 41   

Network Setting > Home Networking > Static DHCP 

The following table describes the labels in this screen.

Select how the Zyxel Device handles clients’ DNS information requests.

DNS Query Scenario

IPv4/IPv6 DNS Server

: The Zyxel Device forwards the requests to both the IPv4 and IPv6 DNS 

servers and sends clients the first DNS information it receives.

IPv6 DNS Server Only

: The Zyxel Device forwards the requests to the IPv6 DNS server and 

sends clients the DNS information it receives.

IPv4 DNS Server Only

: The Zyxel Device forwards the requests to the IPv4 DNS server and 

sends clients the DNS information it receives.

IPv6 DNS Server First

: The Zyxel Device forwards the requests to the IPv6 DNS server first and 

then the IPv4 DNS server. Then it sends clients the first DNS information it receives.

IPv4 DNS Server First

: The Zyxel Device forwards the requests to the IPv4 DNS server first and 

then the IPv6 DNS server. Then it sends clients the first DNS information it receives.

Click

Apply

Apply

 to save your changes.

Click

Cancel

Cancel

 to restore your previously saved settings.

Table 22   Network Setting > Home Networking > LAN Setup (continued)

LABEL

DESCRIPTION

Table 23   Network Setting > Home Networking > Static DHCP

LABEL

DESCRIPTION

Static DHCP 
Configuration

Click this to configure a static DHCP entry.

This is the index number of the entry.

#

Summary of Contents for LTE7461-M602














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands