NetAtlas IES-1000 (AAM1008) EMS User’s Guide
The Configuration Menus
7-35
Table 7-22 Configuration: Port Authentication
LABEL DESCRIPTION
Apply Click
Apply
to save the settings in this part of the screen.
802.1x Port
Configuration
Port This field displays a port number.
Active Select this checkbox to permit 802.1x authentication on this port. You must first allow 802.1x
authentication on the switch before configuring it on each port.
Control Type When this field displays
Auto
, the IES-1000 authenticates all subscribers before they can
access the network through this port.
When this field displays
Force Authorized
, all connected users are allowed to access the
network through this port without authentication.
When this field displays
Force Unauthorized
, all subscribers are denied access to the
network through this port.
Reauthentication This field displays whether (
On
) or not (
Off
) a subscriber has to periodically re-enter his or
her username and password to stay connected to the port.
Reauthentication
Timer
This field displays how often a subscriber has to re-enter his or her username and password
to stay connected to the port.
Set Click
Set
to save the settings in this part of the screen.
Close Click
Close
to close this screen.
7.7.3 Port
Authentication
Setup
To set port authentication on a port, select a port in the
802.1x Port Configuration
table in the
Port
Authentication
screen and click
Set
. A screen displays as shown below.