ZyXEL Communications IES-1000 - ANNEXE 7, User Manual, Page: 44 / 139

NetAtlas IES-1000 (AAM1008) EMS User’s Guide
5-2 Information Formats
Figure 5-2 Edit Table Entry
The following table describes the labels in this screen.
Table 5-1 Edit Table Entry
COMMAND DESCRIPTION
Variable Names The first vertical column contains the variable names; these are the names of fields in the
selected table. These names are set by SNMPc and cannot be changed.
Some tables have variable names with an asterisk to the right of the name. These variables
are used as indices into the table. All index variables must be specified to perform a
Set
operation.
Variable Values The second vertical column contains the variable values in pull down list boxes. You can
change the value by typing into the pull down edit box. If the variable has integer aliases
defined in the MIB, you can select an alias by clicking on the down arrow and selecting an
item from the drop down list. You must enter the variable value in the proper format. Use
the expand button (see
next section ) to view the variable type.
Variable Set Button Each variable value has a small Set button to the right. Click this Set button to perform an
SNMP set on only one variable. Set buttons are grayed for variables that are read-only.
Previous/Next Page
Buttons Each page shows up to ten variables. The page number and total number of pages are
displayed in the top right corner. Use the
>> button to move to the next page and click the
<< button to move to the previous page.
Expand Click the Expand button to expand the view of the active variable value edit box. First click
on the edit box, then select the Expand button.
First Click the First button to obtain the first entry of the table from the node. The variable values
will be updated. You do not need to enter index values - they will be ignored.
Get Click the Get button to obtain the selected table entry. Enter all of the index values to select
a table entry. If you have already displayed an entry, and perhaps modified the value boxes,
you can Click the
Get button to refresh the variable values.
Variable Name Variable Values Variable Set Button Previous and Next Page Buttons
Expand
First
Get
Next
Set
Set All
Done
Help