NetAtlas IES-1000 (AAM1008) EMS User’s Guide
7-22
The Configuration Menus
Figure 7-18 Virtual Channel Configuration: New
The following table describes the labels in this screen.
Table 7-16 Virtual Channel Configuration: New
LABEL DESCRIPTION
Port-VPI-VCI
Port Select the port(s) by clicking on the port number(s).
VPI Specify the Virtual Path Identifier (VPI). Enter a number between 0 and 255.
VCI Specify the Virtual Circuit Identifier (VCI). Enter a number between 1 and 65535.
If VPI is 0, then enter a number between 33 and 65535 in this field.
Configuration
Super Channel
Select this option to allow a channel forward frames belonging to multiple VLAN groups (that
are not assigned to other channels).
One port can have only one super channel. This option is not configurable when there is
already a super channel set for this port.
PVID
This field is not applicable for the super channel.
This field displays the PVID (Port VLAN ID) assigned to untagged frames received on this
channel.
You must set different PVIDs to different channels on the same port.
Priority
This field is not applicable for the super channel.
Specify the priority value (0 to 7) to add to incoming frames without a (IEEE802.1p) priority tag.
You must set different priorities for virtual channels on the same port.