NetAtlas IES-1000 (AAM1008) EMS User’s Guide
7-8
The Configuration Menus
Table 7-4 ADSL Line Profile Management: List All Profiles
LABEL DESCRIPTION
AtucMaxTxRate
This field displays the downstream maximum transmission rate in kilobits per second (Kbps).
AtucTargetSNRMgn This field displays the downstream target SNR margin in decibels (dB).
AtucMinSNRMgn
This field displays the downstream minimum SNR margin in decibels (dB).
AtucMaxSNRMgn
This field displays the downstream maximum SNR margin in decibels (dB).
Close
Click
Close
to close the screen.
7.3 Line Setup
To display the status of the ADSL lines (or ports), click
Configuration
,
ADSL
and
Line Setup
to display the
ADSL Line Setup
screen as shown.
Figure 7-6 System: ADSL: Line Setup
The following table describes the labels in this screen.
Table 7-5 System: ADSL: Line Setup
LABEL DESCRIPTION
Port
The field displays the port (or line) number.
AdminStatus
This field displays
Down
if the port inactive. This field is
Up
if the port is active. This port is
Testing
if you are running a test on the port.
ADSL Mode
This field displays the mode used on the port.
Encap.
This field displays the encapsulation method used on the port.
VPI/VCI
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify a channel on this port.
Profile
This field displays the name of the profile the port is using.
Set Ports
Click
Set Ports
to configure the selected port(s). Refer to
Profile Mapping
Click
Profile Mapping
to associate profiles to the ADSL ports.