NetAtlas IES-1000 (AAM1008) EMS User’s Guide
6-4
The System Menus
The IES-1000 automatically restarts when configuration file upload is complete.
6.3 Configuration Save
Follow the steps below to save your current ADSL configuration.
Do
not
turn off the IES-1000 during the updating process, as it may corrupt the firmware and
make your IES-1000 unusable.
1.
Click
System
,
Configuration
Save
to display the
Config Save
screen shown next.
Figure 6-5 System: Configuration Save
2.
Select
Yes
and click
Apply
to save the configuration.
3.
The progress bar displays the status. The “
Config Save Succeeded
” message displays when the
configuration save is complete.
4.
Click any button to close the screen.
6.4 Reset
The Reset screens allow you to reboot the IES or reset the port connections.
6.4.1 System
Reboot
Follow the steps below to reboot the IES.
1.
Click
System
,
Reset
and
System
Reset
.
Figure 6-6 System: Reset: System Reset