ZyXEL Communications GS1510-16 - User Manual Download Page 94

Page: 94 / 204

Chapter 16 Storm Control

GS1510 Series User’s Guide

The following table describes the labels in this screen.

Table 26

Broadcast Storm Control

LABEL

DESCRIPTION

Storm Control Settings
Port

Select the port number for which you want to configure storm control
settings.

Rate

Select the number of packets (of the type specified in the

Type

field) per

second the Switch can receive per second.

Type

Select

Broadcast

- to only specify a limit for the amount of broadcast packets

received per second.

Multicast

- to only specify a limit for the amount of multicast packets

received per second.

DLF

- to only specify a limit for the amount of DLF packets received per

second.

Bcast+Mcast

to specify a limit for the amount of broadcast and

multicast packets received per second.

Mcast+DLF

to specify a limit for the amount of multicast and DLF

packets received per second.

Bcast+DLF

to specify a limit for the amount of broadcast and DLF

packets received per second.

Bcast+Mcast+DLF

to specify a limit for the amount of broadcast,

multicast and DLF (Destination Lookup Failure) packets received per
second.

Apply

Click

Apply

to save your changes.

Refresh

Click

Refresh

to begin configuring this screen afresh.

Storm Control Status
Port

This field displays the number of a port.

Rate (pps)

This field displays the number of packets (of the type displayed in the

Type

field) per second the Switch can receive per second.

Type

This field displays the packet types that the limit (of the rate displayed in
the

Rate

field) is applied on the Switch.

Summary of Contents for GS1510-16 -













































































































































































































Search results

Summary of Contents for GS1510-16 -

Reviews:

Related manuals for GS1510-16 -

Brands by name

Popular brands

ZyXEL Communications GS1510-16 -, User Manual

Search results

Summary of Contents for GS1510-16 -

Reviews:

Related manuals for GS1510-16 -

Brands by name

Popular brands