ZyXEL Communications GS1510-16 -, User Manual

Page: 41 / 204

Chapter 4 The Web Configurator
GS1510 Series User’s Guide
41
The following table describes the links in the navigation panel.
Table 3 Navigation Panel Links
LINK DESCRIPTION
System Status
System
Information Use these screens to view general system information such as firmware
version, IP address and so on.
Basic Settings
General Settings Use these screens to configure the system name, IP address,
maximum frame size, and system time settings.
MAC
Management Use these screens to configure static MAC address settings and view
the MAC table.
Port Mirroring Use this screen to copy traffic from one port or ports to another port in
order that you can examine the traffic from the first port without
interference.
Port Settings Use this screen to enable/disable a port, configure the port speed and
duplex and flow control, and view the current connection status.
Advanced Settings
VLAN
Port Isolation Use this screen to isolate each port from communicating with each
other. Each port can only communicate with the CPU management port.
VLAN Use these screens to create new IEEE 802.1Q VLANs as well as
configuring Port VLAN ID (PVID), tag/untag, and acceptable frame
settings.
EEE Use this screen to enable/disable Energy Efficient Ethernet on each
port.
IGMP Snooping Use this screen to configure multicast related settings such as IGMP
Snooping, IGMP Snooping VLAN, unknown multicast packet handling,
and immediate leave ports.
Link
Aggregation Uses these screens to logically aggregate physical links to form one
logical, higher-bandwidth link.
Loop Guard Use this screen to configure protection against network loops that
occur on the edge of your network.
QoS Use these screens to configure 802.1p priority, IP Diffserv (DSCP),
queuing method with associated queue weights and priority/queue
mapping for the Switch.
Storm Control Use this screen to cap the rate of broadcast, multicast and destination
lookup failure (DLF) packets the Switch will allow on individual ports.
STP Use these screens to configure the STP/RSTP to prevent network loops.
Security
IP Source Guard
DHCP
Snooping
Use these screens to configure filtering of unauthorized DHCP packets
in your network.
ARP
Inspection
Use these screens to configure filtering of unauthorized ARP packets in
your network.
Binding Table Use this screen to view the information of any hosts which successfully
connected to an IP address through the DHCP server.