ZyXEL Communications GS1510-16 -, User Manual

Page: 79 / 204

Chapter 13 Link Aggregation
GS1510 Series User’s Guide
79
The following table describes the labels in this screen.
13.5 LACP
Click Advanced Settings > Link Aggregation > LACP to display the following
screen. See Section 13.3.1 on page 77 for more information on dynamic link
aggregation.
Figure 42 LACP
Table 19 Static Trunk
LABEL DESCRIPTION
Group State Select the group ID to use for this trunk group, that is, one logical link
containing multiple ports.
Select Enable to use this static trunk group.
Member
Ports Select the ports to be added to the static trunk group.
Select All Click this to select all ports as members of the static trunk group.
Deselect All Click this to deselect all ports as members of the trunk gorup.
Apply Click Apply to save your changes to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
Group ID This field displays the group ID to identify a trunk group, that is, one logical
link containing multiple ports.
State This field displays if the trunk group is enabled or disabled.
Member
Ports This field displays the assigned ports that comprise the static trunk group.