ZyXEL Communications ES-1552 - V1.12, User Manual

Page: 80 / 172

Chapter 12 Port Rate Limit and Storm Control
ES-1552 User’s Guide
80
The following table describes the related labels in this screen.
12.1.1 Rate Limit Screen
Click a port number in the Port Rate screen to bring up the screen as shown next.
Figure 43 Rate Limit Configuration
The following table describes the related labels in this screen.
Table 22 Rate Limit and Storm Control
LABEL DESCRIPTION
Port This field displays the port number. Click on an individual port number to configure rate
limits on that port.
Ingress Rate Displays the maximum bandwidth allowed in kilobits per second (Kbps) for the
incoming traffic flow on a port.
Egress Rate Displays the maximum bandwidth allowed in kilobits per second (Kbps) for the out-
going traffic flow on a port.
Table 23 Rate Limit Configuration
LABEL DESCRIPTION
Ingress Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming
traffic flow on a port.
Egress Traffic
Shaping
Select Disabled to not have any bandwidth limits for outgoing traffic on the port or
select Enabled to enable bandwidth limits for outgoing traffic on the port.
Rate This is a read only field indicating the rate limit of outgoing traffic on the port in Kbps.
This value changes depending on the number of Tokens Added Per Interval .