ZyXEL Communications ES-1552 - V1.12 User Manual Download Page 64

Page: 64 / 172

Chapter 8 VLAN

ES-1552 User’s Guide

8.2 Static VLAN

Use a IEEE 802.1Q VLAN to decide whether an incoming frame on a port should be

• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.

You can also tag all outgoing frames (that were previously untagged) from a port with the
specified VID.

8.2.1 IEEE 802.1Q VLAN Screen

Use this

screen to display IEEE 802.1Q VLAN status. Click

VLAN

in the navigation panel to

display the

IEEE 802.1Q VLAN

screen as shown next.

Figure 31

VLAN: VLAN Status

The following table describes the labels in this screen.

Table 12

VLAN: VLAN Status

LABEL

DESCRIPTION

VLAN ID

Select which VLAN you want to configure or click

Create New VLAN

to go to the

new VLAN configuration screen.

VLAN Status

Table

This table shows you the existing VLANs and their configurations.

VLAN ID

Click on the VLAN ID to go to the VLAN edit screen.

Member Ports

All the ports participating in the VLAN are listed here. The ports show up in two

different colors:

• (Orange) When the packet leaves this member port, the VLAN tag is

added.
• (Turquoise) When the packet leaves this member port, the VLAN tag is

removed.

Click this button to view VLANs with lower identification numbers. This field is only

active if there are more VLANs than can be displayed on one screen.

Click this button to view VLANs with higher identification numbers. This field is only

active if there are more VLANs than can be displayed on one screen.

Summary of Contents for ES-1552 - V1.12













































































































































































Search results

Summary of Contents for ES-1552 - V1.12

Reviews:

Related manuals for ES-1552 - V1.12

Brands by name

Popular brands

ZyXEL Communications ES-1552 - V1.12, User Manual

Search results

Summary of Contents for ES-1552 - V1.12

Reviews:

Related manuals for ES-1552 - V1.12

Brands by name

Popular brands