ZyXEL Communications ES-1552 - V1.12 User Manual Download Page 32

Page: 32 / 172

Chapter 2 Hardware Installation and Connection

ES-1552 User’s Guide

Do NOT block the ventilation holes. Leave space between devices when
stacking.

For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front
and 3.4 inches (8 cm) at the back of the switch. This is especially important for
enclosed rack installations.

2.2 Mounting the Switch on a Rack

This section lists the rack mounting requirements and precautions and describes the
installation steps.

2.2.1 Rack-mounted Installation Requirements

• Two mounting brackets.
• Eight M3 flat head screws and a #2 Philips screwdriver.
• Four M5 flat head screws and a #2 Philips screwdriver.

Failure to use the proper screws may damage the unit.

2.2.1.1 Precautions

• Make sure the rack will safely support the combined weight of all the equipment it

contains.

• Make sure the position of the switch does not make the rack unstable or top-heavy. Take

all necessary precautions to anchor the rack securely before installing the unit.

2.2.2 Attaching the Mounting Brackets to the Switch

Position a mounting bracket on one side of the switch, lining up the four screw holes on
the bracket with the screw holes on the side of the switch.

Summary of Contents for ES-1552 - V1.12













































































































































































Search results

Summary of Contents for ES-1552 - V1.12

Reviews:

Related manuals for ES-1552 - V1.12

Brands by name

Popular brands

ZyXEL Communications ES-1552 - V1.12, User Manual

Search results

Summary of Contents for ES-1552 - V1.12

Reviews:

Related manuals for ES-1552 - V1.12

Brands by name

Popular brands