ZyXEL Communications Dimension ES-3024, User Manual, Page: 179 / 212

Dimension ES-3024 Ethernet Switch
25-14 Introduction to CLI
Table 25-2 Command Summary: sys sw
COMMAND DESCRIPTION
display Displays current run-time trunk
settings.
listView Displays member list of trunk.
set <group><# ports> Adds ports to a trunk group.
ingress
set <port> <enable | disable> Sets ingress check on a port.
get <port> Gets ingress check state on a
port.
viewAll Gets ingress check state on all
ports.
learn
enable [port] Enables address learning on the
port.
disable [port] Disables address learning on the
port.
display [port] Displays address learning status.
isolate
disable Disables port isolation.(All
connected)
port <port> <Port-List (in Hex)> Sets the port-list which can
connected to the specific port.
enable Enables port isolation.
mc
set <addr> <port>... Sets ports to a specific multicast
address
del <addr> Deletes a specific multicast
address
get <addr> Shows settings of the multicast
address
vlan
status Displays VLAN status
type <802.1q | port-based> Sets VLAN mode
25.2.3 exit Command
Table 25-3 Command Summary: exit
COMMAND DESCRIPTION
exit Ends the console or telnet
session.