ZyXEL Communications Dimension ES-3024, User Manual, Page: 172 / 212

Dimension ES-3024 Ethernet Switch
Introduction to CLI 25-7
Table 25-1 Command Summary: sys
COMMAND DESCRIPTION
snmp getCommunity <index>
[<community>]
Sets or displays the SNMP
GetRequest community.
setCommunity <index>
[<community>]
Sets or displays the SNMP
SetRequest community.
trustedHost <index>[<hostt>] Sets or displays the SNMP trusted
host.
trapCommunity <index>
[<community>]
Sets or displays the SNMP Trap
community.
trapDest <index>[<destination>] Sets or displays the SNMP trap
server.
disp <index|all> Shows SNMP settings.
cluster active <name> Assign a cluster name and enable
clustering it.
inactive <name> Disable the cluster named.
add <MAC addr> <password>
Add a member switch into the
cluster using its web configurator
password.
remove <MAC addr> Remove a member switch from the
cluster.
showMember Shows details of member switches
in this cluster.
showCandidate
Shows a list of auto-discovered
potential cluster members.
status Shows whether this switch is a
cluster member, cluster manager
or neither and information about
members in the cluster.
25.2.2 sys sw Commands
The following commands are system switch commands; all are preceded with
sys sw
Table 25-2 Command Summary: sys sw
COMMAND DESCRIPTION
garp status Shows the GARP timer status.
timer <join timer(ms)><leave
timer(ms)><leave all timer<ms>
Sets the GARP timer’s Join
Timer, Leave Timer and Leave All
Timer.
gvrp trace Sets GVRP trace level.
enable Enables GVRP.
disable Disables GVRP.