ZyXEL Communications COMET 336, User Manual

Page: 41 / 70

34 AT Command Set Summaries
Command Options Function & Description Ref.
(hang-up).
*Qn Action taken when line quality changes. S27.6-7
*Q0 No action to poor signal quality.
*Q1 Retrain action taken if signal quality is poor.
*Q2 * Adaptive rate, automatic fall-back or forward.
*Q3 Disconnect if signal quality is poor.
#CID=n Enable or disable Caller ID.
N=0 Disable CID
N=1 Enable CID w/ formatted presentation to the DTE.
N=2 Enable CID w/ unformatted presentation to the DTE.
-SDR=n N=0 Disables Distinctive Ring. Any valid ring detected is
reported as RING (default).
N=1 Enables Distinctive Ring Type 1
N=2 Enables Distinctive Ring Type 2
N=3 Enables Distinctive Ring Type 1 and 2
N=4 Enables Distinctive Ring Type 3
N=5 Enables Distinctive Ring Type 1 and 3
N=6 Enables Distinctive Ring Type 2 and 3
N=7 Enables Distinctive Ring Type 1, 2, and 3
Fax commands are located in Chapter 8 of the ZyCD edition of the Comet 336 User’s
Manual.
Voice commands are located in Chapter 9 of the ZyCD edition of the Comet 336 User’s
Manual.