ZyXEL Communications COMET 336, User Manual

Page: 69 / 70

62 Voice Operation
n=1 Route only the handset through the modem.
Can be chosen before recording a greeting
message.
n=2 route only the speaker through the modem.Can
be chosen before playing back any message.
n=3 only the auxiliary input device (microphone)
should be routed through the modem. Can be
chosen before recording a greeting message.
n=4 the same as #VLS =0, except that the modem
enables the internal speaker as well as the
telephone line/handset circuit.
n=5 selects telephone emulation mode while in
#CLS=8 mode. Speakerphone operation is
entered during Voice On-line (VCON) mode
after completing dialing (ATD) or answering
(ATA).
n=6 Selects speakerphone mode while in #CLS=8
mode. Telephone emulation operation is
entered during Voice On-line (VCON) mode
after completing dialing (ATD) or answering
(ATA).
n=7 valid after Voice On-line mode, mutes the
local handset by switching the handset or
speakerphone out of the telephone line path if
in #VLS=0 or #VLS=6 mode.
n=8 Valid after Voice On-line mode. Engages the
Caller ID relay to allow recording of
conversation when using a handset by routing
the signal to the audio codec (if populated).
n=9 Routes the handset to the sound codec to
allow recording/playback of audio through
the local handset.
#VRA Ringback goes away timer (originate).
n=0-255 (0 - 2.55 sec), default:70
#VRN Ringback never came timer (originate).
n=0-255 (0 - 2.55 sec), default:100
#VRX Voice receive mode.
#VSD Enable silence deletion (no function,
command response only).
n=0,1 Provide no function other than command
respond compatibility.
#VSK n=255 Buffer skid setting.