background image

Introduction  1

1  

Introduction

Congratulations on the purchase of your Comet 336 modem - one of ZyXEL's premier
high-performance products.  The Comet 336 is world renown for its ability to maintain
ultra high speeds and clear, quality connections while communicating around the globe.

Unpacking Your Modem

Before you proceed further, please check all items you received with your modem
against this list to make sure nothing is missing. The complete package should include:

• 

One (1) Comet 336 modem

• 

One (1) AC power adapter (external model)

• 

One (1) RJ-11 modular telephone cable

• 

One (1) Comet 336 User’s Manual

• 

One (1) ZyXEL modem driver diskette with Windows 95 INF file

• 

One (1) Data/Fax software for Windows environments

• 

One (1) warranty/registration card

• 

One (1) Zy CD

• 

One (1) standard RS-232 cable

Contact your dealer or the store where you bought the modem if anything is missing.
Check the modem for shipping damages. If you find any damage, contact the shipping
agency immediately.

Retain shipping and packaging materials for future storage or shipping needs.

Becoming a Registered Owner

Complete the pre-addressed Warranty Registration Card and place it in the mail.
Registered owners will receive future product information and update announcements.
Warranty registration is not necessary for product repair/or replacement - please also
save your dated invoice as proof of purchase.

Summary of Contents for COMET 336







































































Reviews: