HDME-804 Manual V1.0 1/16
12
HDME-804 example 2:
Setting the Output Channel to CH# 2 would result in the following RF1/RF2/RF3/RF4 configuration below.
RF1 (QAM 1) RF2 (QAM2)
RF3 (QAM 3) RF4 (QAM 4)
CH # 2.1
CH # 3.1
CH # 4.1
CH # 5.1
CH # 2.2
CH # 3.2
CH # 4.2
CH # 5.2
Step 5:RF Setup
RF Setup
Use the RF Setup Page to setup each RF Output
Select
RF Output 1
,
RF Output 2, RF Output 3, or RF Output 4
Select
and set
the required parameters you require for your installation.
The HDME-804 offers the integrator the ability to disable a RF QAM. To Disable the a RF Output (QAM) simply
“uncheck”
the “enable” checkbox on any RF Output tab.
Application Note:
When installing more than 1 device into a system, each device must have an unused RF TS ID.
Step 6: Local Save
Perform
a
Local Save for each
RF Output tab.
IN-1
IN-2
IN-3
IN-4
IN-5
IN-6
IN-7
IN-8
