HD-4002DM User Guide and Install Manual
Page 5
After connecting the device to the “Web Management” port located on the rear of the device and locating the device via the
‘Network’ tool in ‘My Computer’
STEP 1:
Right Click and Select “View device Webpage”.
Overview status of the Encoder when fully functioning. Alternate between viewing status of RF Output 1 and RF Output 2 by
selecting the RF Output section of the device you want to monitor.
STEP 2
: Login Select Common Setup
Once the Common Setup Tab is selected you will be prompted to enter the user name and password for device:
STEP 3
: Common Setup Tab
Common Setup: Use the Common Setup Page to set the Output channel, Attenuation, LCN Mode, and Device Address.
Encoder Programming and Setup via GUI Interface
Overview page of resi-linx digi-MOD HD
NOTE:
Image displays the Quad version
of the HDT Encoder
.
Default User Name:
admin
Default Password:
Admin123
