Zxch ZX-V8, Owner'S Manual

Page: 27 / 32

- 26 -
speed of 1km/h.Stand on the running belt, hang on to the foam handrails and try to press
the running belt harder with your feet.
（
We suggest the user to stamp with your own body weight
）
A If the running belt doesn’t stop when you press it, then the running belt and motor belt
is not flabby or not tight. They are just right
;
B If the running belt stops when you press it, but the front roller doesn’t stop, then the
running belt is a little loose, then you need to adjust the running belt for the safe use (to
adjust running belt loose and tightness see the maintenance guideline in the before
page);
C If the running belt and front roller stop when press the running belt, the motor still run,
the motor belt and running belt stops, then the V-belt is flabby, you need to adjust it for
the use safety.
ADJUST METHOD
Step 1: Unscrew the 4 bolts of front motor protector cover, this way, you take off the
protector cover.
Step 2: Unscrew the four bolts of motor base(do not remove it) and adjust the adjusting bolt
on the motor base with a winch according to the condition. you can use hand to
reverse the motor belt which is between motor axis and front roller,if it is too
loose,you can reverse the Ploy V-Belt by 100%. If it is too tight, the degree you can
turn the V-belt is very limited. After adjustment,if you can reverse the motor belt
about 80%, then the motor belt is just right. Please adjust the V-belt tightness into
the condition, that it can turn by 80%.
Step 3: Lock the motor base frame and assemble the motor cover.