background image

                       

 

 

- 11 -

 

 

PREPARE

 

 
If you are more than 45 years old, or have health problem, and    this is your first time to do exercise, 
please consult the doctor or the professional before you use it.

 

 

 

 

 

Before you use the motorized treadmill, please stand aside to learn the how to operate, such as 
how to start, stop and adjust speed., you can use it after you are familiar with it.Then stand on the 
plastic non-slip plate of the treadmill sides and grip the handrail with both hands , turn on the 
treadmill to1.6—3.2km/h, low speed, stand    straight, look forward,    try to run on the running belt 
few times with one foot, then stand on the running belt to do exercise. After you are adapted, you 
can adjust the speed to 3—5km/h slowly, and keep this speed for about 10 minutes, then stop the 
treadmill slowly. 
 

EXERCISE

 

 
PLS stand aside to learn how to operate, such as adjust speed and incline, start do the Exercise 
after you are familiar with it.Walk 1 km by constant step, and record the time used,which may need 
about 15-25 minutes. Walk 1km by 4.8km/h need about 12minutes,after you can do it easily by few 
times, you can adjust to the high speed and incline, and go on for 30 minutes, you can have a good 
exercise. Before you do walking exercise, please be noted: do not rush, this exercise is for the 
health of your lifetime ,not a one night magic. remember it is for your health and can not be irritable. 
 
EXERCISE FREQUENCY 
 
Target is 3--5 times per week, 15-60mins each time. It is better to make a time schedule first, not   
according to your preferences. You can control the movement intensity through adjusting speed and 
incline. We suggest you not to set incline when you start to do exercise. But when you want to 
increase the movement intensity increasing the incline is a effective way. 
 
AMOUNT OF EXERCISE

 

 
SHORTCUT----The best way to save time is 15-20 minutes exercise.Warm up 2 minutes by 4.8 
km/h, then increase the speed to 5.3 km/h and 5.8 km/h, each continue for 2 minutes. Then add 0.3 
km/h per 2mins, until you feel breathing quickened but not difficult. Keep exercise in this speed, if 
you feel hard to breathe, lower the speed to 0.3 km/h. at last, Leave 4 minutes to reduce the 
speed,at last. If you feel it is hard to strengthen the movement intensity by increasing speed, then 
you can choose the way to increase incline slowly, increase incline slightly already can easily 
strengthen the movement intensity greatly. CONSUMPTION OF HEAT----This way can really   
consume the Calories Warm up 5 minutes by 4--4.8 km/h speed, then add 0.3 km/h per 2 minutes, 
increasing speed, until you feel it a challenge to do 45mins exercise continually . In order to 
strengthen intensity. You can do exercise for 1 hour by this speed in a TV program, and add 0.3 
km/h speed when you see the business advertisements, and return to the former speed by the next 
program, so during the advertisements time and the pulse increasing time ,the Calories will be 
consumed enough. At last left 4 minutes to reduce the speed. 

Summary of Contents for ZX-V8

































Reviews: