Zxch ZX-V8, Owner'S Manual

Page: 20 / 32

- 19 -
（
4
）
.Pulse program
（
match function
）
5.1At standby mode, press program button, can choose pulse program HRC1,HRC2,HRC3,
program default time is 30:00,pressing speed+ and speed- choose operation time, press
mode button, confirm and enter into age setting, after pressing mode button to confirm, press
start to operate. when time countdown to zero, treadmill stop operation.
5.2Pulse program check every 15 seconds, when the pulse detected is smaller than target
pulse rate, speed increase, when the pulse detected next 15 seconds is still smaller than
target pulse rate, incline increase. speed and incline increase alternately
.on the contrary,
when the pulse rate detected is bigger than target pulse rate, speed and incline decrease
alternately. every change speed by 0.2,change incline by1.
5.3pulse rate setting
Pulse rate program HRC1 target pulse rate=(220-age inputted)*0.65
Pulse rate program HRC2 target pulse rate=(220-age inputted)*0.75
Pulse rate program HRC3 target pulse rate=(220-age inputted)*0.85
Pulse
transmission belt is used on the chest
it can detect pulse in real time,detecting in real time is most dependable way in the pulse detect in
work out process.
It is totally waterproof,pulse rate is highly precise.Study shows ,if you stop in the workout and detect
pulse,the pulse will drop 10-20 times/minute.So to understand pulse rate is better than estimating
pulse rate.
The design of comfortable pulse transmission belt take full consideration of
degree of comfort.
We apply human Engineering, dexterous and light,so you can not even feel its existence,and its not
effected by wind rain and wet.the quality is dependable,
durable and enduring,
the length of use of pulse transmission belt is 2500 hours,if you exercise 10 hours per week,you can
use it for 5 years.
( 5) Pulse test
（
Marching HRC Pulse test function
）
1. Gently hold pulse rate sensor, after 5 seconds, pulse rate show corresponding pulse