Zxch ZX-V8, Owner'S Manual

Page: 17 / 32

- 16 -
5.Speed window: Display the current speed in the operating state, speed display
range:1.0-20km/h
6.Incline window: Display current incline value, incline display range:0-18 levels.
7.Matrix window: At the manual mode, display racetrack, it display incline and speed in the middle;
At the preset programs, it display speeds and incline changing image.
（
2
）
Buttons and their functions
：
1.
“
Start
”
press this button once, to start the treadmill.
2.
“
Stop
”
in the operation, press the button to stop the treadmill.
3.
“
Mode
”
function choosing button, Press the button can select :time countdown, distance
countdown, calories countdown.
4.
“
Programs
”
:Circular selection the 24 preset programs: P1,P2,P3-------P24 and 2 user
programs.
5.”Speed+” : in the operation, press this button treadmill speed add 0.1;When set
time, distance, calorie and etc, press this button add the value.
6.”Speed-’”: in the operation, press this button treadmill speed reduce 0.1;When set time,
distance, calorie and etc, press this button reduce the value.
7.””: under the operating state, press the button can add the incline.
8.”Incline-“: under the operating state, press the button can decrease the incline.
9.”Volume start and stop’’ : press this button to start to play or pause playing.
10.”Sound +”: press this button the volume increases
11.”Sound –“: press this button the volume decreases
12.”Former music “:press this button play the former music.
13.”Next music “: press this button play the next music.
（
3
）
operation instruction
1. manual Mode
Connect the power, at the same time, the meter beep a long sound, after 2 seconds, enter
into standby mode, plug on the safety key, press start button to start the treadmill, move at
the lowest speed, time, calorie and distance count in forwarding direction,can change speed
through speed+ and speed-,change incline through and incline-.
2.Countdown mode :
2.1Time countdown mode
1)At the standby mode, press mode button once, time window flashes, default time is
30,press speed+ and speed- to choose time value, each time press speed+ and
speed-,time value would increase or decrease by 1 minute, the time range can be adjusted
is 5:00-99:00
2)Press start button to operate, when time is countdown to zero, the treadmill stop operating,
in the operation, speed and incline can be adjusted.
2.2Distance countdown mode:
1)at the standby mode, press mode button twice, distance window flashes, default distance
is 5.00.press speed+ and speed- to choose distance value. each time press speed+ or
speed-,distance value increase or decrease by 0.1,the distance value range that can be
adjusted is 0.50-99.00
2)Press start button to operate,when distance countdown to zero, treadmill stop operating, in
the operation, speed and incline can be adjusted.
2.3Calorie countdown mode: