Zupapa Saffun Trampoline, User Manual

Page: 9 / 32

Dos
Don’ts
Before assembling, you should find a safe area to place the trampoline. Measure your yard to find out how much space you have.
Keep the following two parameters in mind:
• Ensure the place is clear of any obstacles including but not limited to debris, walls, fences, branches, slopes, and electrical power
wiring;
• Ensure the place is flat and even. If the ground is not level, never try to make it serve as the jumping area;
• Install the trampoline in a well-lighted area;
• Install the trampoline on the lawn without obstacles underneath, surrounded, and overhead because it keeps the trampoline
stable and firm from sliding with traction as well as keeps the jumper from severe injuries in case of falling;
• Adjust somewhere a little uneven (only applicable for the place where the rise/gradient should be no more than 3 degrees across
the whole space) if you have to place the trampoline there.
• The minimum overhead clearance space required is 24 feet (about 7.3 meters);
• The minimum lateral clearance space required is 8.2 feet (about 2.5 meters) on all sides of the trampoline.
Follow dos and don’ts as below:
• Do not install the trampoline on hard ground such as driveway, asphalt, or concrete;
• Do not install the trampoline on a hill or somewhere that is sloping;
• Do not install the trampoline anywhere the slope is greater than 3 degrees across the whole space.
8
04
PLACEMENT