Zünd AKI 2, Instruction Manual

Page: 5 / 12

Instruction Manual
Safety requirements
AKI 2 5
6. July 2006, muj, _1
3.2 Proper use
A basic requirement of safe operation is that the equipment must only be used for its
intended purpose.
The equipment supplied determines the possible uses of the tool.
The AKI2 is mainly intended for automatic initialisation of the PN series with the
stated tools and modules.
Any other use that does not meet this description shall be classed as improper use.
The operator is solely liable for any damages resulting from improper use!
Use of the tool shall be regarded as proper
– if all nationally imposed safety requirements are met
– If the safety requirements listed in this operating manual are met
– if the usage conditions are complied with
3.3 Examples of improper use
– Use of unsuitable tools
– improper and/or non-intended use
– structural alterations to the equipment without the permission of Zünd
– Non-adherence to safety requirements
– Failure to react to signs of abrasion and damage
– Deactivation of safely equipment
3.4 Danger due to improper use
– Breakages of tool inserts
– Damage of equipment
– cutting injuries due to sharp cuts