Zünd AKI 2, Instruction Manual

Page: 10 / 12

Instruction Manual
Operation
10 AKI 2
6. July 2006, muj, _1
4.4 Automatic initialisation
(Fig. 6) Positioning AKI2
• Put the head with the help of the keyboard in the centre of the table.
A Position AKI2 on the table and press the directional bolt in the holder on the
table.
B Press AKI2 on the table top with the positioning handle. This ensures that the
AKI2 is lying flat on the table surface.
C After starting the initialisation ( 11851 ) the active module is positioned
automatically above the initialisation groove of the AKI2.
Caution!
Risk of damaging the equipment
If the AKI2 is placed on the table and the automatic initialisation is started, bar or
head can collide with the AKI2.
• Place the AKI2 before and after the initialisation in the park station.
• Check before the automatic initialisation whether the AKI2 is anchored correctly
in the positioning aid.
A
B
C
D
w00020