6. Acceleration
a. Turn on your radio and set the throttle stick to top positon (100%)
b. Plug the battery pack into your controller
c. Wait for 2 seconds, you will hear 4 groups of two sets of fast beeps, after this you will hear
four single beeps to indicate you have successfully entered the programming mode
d. When you here
∨∨
∨∨
∨∨
∨∨
means you are in the Star up Strength menu, please
choose your desired value by pulling the throttle stick to the lowest position.
e. The system will exit automatically and save the setting after nishing the desired item. You
only can setup one item at a time, if you want to program another item you need unplug the
battery and power on the ESC again.
Soft
–---- Recommend for the plane with driving gears or helis
Normal
- Recommend for the plane with driving gears or helis
Hard
– Recommend for direct driving system
7. Heli Mode: Off/Mode 1/Mode 2
a. Turn on your radio and set the throttle stick to top positon (100%)
b. Plug the battery pack into your controller
c. Wait for 2 seconds, you will hear 4 groups of two sets of fast beeps, after this you will hear
four single beeps to indicate you have successfully entered the programming mode
d. When you hear _*_ _*_ _*_ _*_ means you are in the Heli Mode menu, please choose
your desired value by pulling the throttle stick to the lowest position.
e. The system will exit automatically and save the setting after nishing the desired item. You
only can setup one item at a time, if you want to program another item you need unplug the
battery and power on the ESC again.
OFF: Default
Heli Mode 1
: There is 5 seconds delay from start to full heading speed.
Heli Mode 2
: There is 15 seconds delay from start to full heading speed.
Note: ESC Brake and Low Voltage Cutoff Type settings will automatically be reset to Brake
Off and Reduce Power respective once the Heli mode is activated.
5
e. The system will exit automatically and save the setting after nishing the desired item. You
only can setup one item at a time, if you want to program another item you need unplug the
battery and power on the ESC again.
Automatic
(7-30 deg)
– ESC automatically detect the best motor timing
Low (7-22 deg)
– Setting for most 2 pole motors.
High(22-30 deg)
-setting for motors with 6 or more poles.
Note
: For the beginner we recommend automatic timing to achieve best performance. For the
multiple poles motor we recommend high timing to gain best efciency.
