Copyright © ZTEWeLink Technology Co., LTD, All rights reserved.
28
GE2015
Dev Board User Guide
MP0
MP1
10
RESET button (S3)
When press this button, PWR_RST can be connected and set as low, when release this button, module can be reset.
11
Jumper (TP9)
TP2 is used for connecting 1.8V IO of module to VCCIO on GE2015_SB
12
PCI EXPRESS MiNi Card
Connector (X10)
PCI EXPRESS MiNi Card Connector
13
SIM card holder (X2)
SIM card, support plug test.
14
DC power interface
Including a 3.3V power hole and a GND hole for connecting DC power for system power-up. When choose DC power supply, TP6
need to connect the jumper of the right two pins.
NOTE:
The silk printing and the schematic diagram of GE2015_SB_ME3630PCIE are shown in appendix
